Ring pillow *now with flash*

My cushion only has 2 ribbons so showing you will not help. Can you flash a picture of the cushion and then one of how you have tied it might help us if we see what it looks like. x

Duplicate post.

Hiya

You have 2 ring ties for each ring, slip the ring onto one and tie it in a bow like you would a shoe lace. The trick to a good bow is to put your thumbs in the loops and pull it nice and tight.
I would have put a picture on but my main pc died taking all my old photo's with it.

As Debbie says, tie the rings on with a normal bow, or you can loop the ribbon through as in the second pic:

Ok here is my lovely pillow without rings

And with rings

The ribbon on your cushion is a little bit wider than they norally would be but that's ok. You've tied them right but just need to adjust the bows. Put you thumbs into the loopy bits of the bow and pull it nice and tight. So you want the loops at the top and tails at the bottom, thumbs in, pull it tighter which will make the bow look neater and the tails a little bit longer than you have done in the picture. Try and do them so they both face in the same direction. The one on the left looks like it is pointing the other way.

Sorry if that sounds double dutch. You just need to practice and it will look lovely.

Yes I see what you mean. Thank you. I will keep working on it!!! Who would of thought it would be hard to get a ring cushion perfect!!!!!!!!